 |
Worldwide Shipping from the USA
|
|
|
|
|
|
Your On-Line Source for Pumps and Parts! |
|
 |
|
|
|
|
March TE-6T-MD 3 PH Mag-Drive Centrifugal Pump |
| • March DP-6T-MD, TE-6T-MD and TE-6K-MD Series pumps have a capacity of up to 38 GPM (110.5 LPM) with a maximum of 46 feet (11m) of head. They can be made compatible with a wide range of chemicals through a myriad of O-rings, bushings and spindle material alternatives available. Models manufactured of Kynar (PVDF) are particularly suited for difficult solutions, such as those based on halogens or chromic and sulfuric acids. Additional material options include glass-filled polypropylene, Ryton, ceramic and Viton. |
| • Suitable for a range of applications from commercial-size aquariums and D.I. water systems to etching equipment and electrical discharge machinery (EDM), March series 6 pumps are the only models in the March Pump line equipped with a drip-proof motor (DP-6T-MD) as standard. |
| • All plastic parts of the pump are molded out of Ryton R4, Polypropylene, or Kynar. The stationary spindle and Thrust Washers are made of porcelain ceramic. The O-ring for the housing is Viton rubber. The bushing in the Impeler Assembly is a molded Carbon/Teflon/Ryton material. There are no other materials in contact with the solution. |
• The DP-6T-MD pump has a Drip Proof motor and the TE-6T-MD and TE-6K-MD pumps have a totally enclosed fan cooled motors in single, three-phase and explosion-proof optional. Standard motors are 115/230 volts, 50/60 cycle, 1 phase or 230/460- volt three-phase, 50/60 Hz. 3450 R.P.M. rated as continuous duty. The motors are thermal overload protected and have U.L. recognition for pumping water.
|
| |
|
|
|
|
|
|
 |
Easily bookmark or share this web page with someone: 
|
|
|
|
|
|
