 |
Worldwide Shipping from the USA
|
|
Your On-Line Source for Pumps and Parts! |
|
|
|
|
|
 |
|
|
|
|
March TE-8S-MD Mag-Drive Centrifugal Pump
Product Details Page:
|
| • March TE-8C-MD, TE-8K-MD and TE-8S-MD Series totally enclosed pumps, with standard wetted parts of glass-filled polypropylene, carbon-filled Kynar and 316 stainless steel, are the ideal choice for handling difficult liquids, such as strong halogen or chromic, and sulfuric acid solutions. Typical applications range from computer cooling systems and waste treatment plants to plating operations, photo processors and chemical plants. |
| • Flow rates range from 25 GPM (90 LPM) minimum to 125 GPM (400 LPM) maximum at heads from 0 ft. to 95 ft. (20m) maximum. |
• Available 3450 rpm totally enclosed severe duty drive motors are the standard 3HP (2.235 kw), three-phase 230/460-volt and the 5 HP (3.725 kw), three-phase 230/460-volt explosionproof model (used in the stainless steel pump). A steel frame totally enclosed motor that is not chemical-resistant is also available. Standard port configuration is a 2" MPT inlet with a 1 1/2" MPT outlet. |
| • On the TE-8C-MD and TE-8K-MD models all plastic parts are molded out of talc filled polypropylene or Kynar. The stationary spindle and Thrust Washers are made of porcelain ceramic. The O-ring for the housing is Viton rubber. The bushing in the Impeller Assembly is a filled Teflon and Ryton material. There are no other materials in contact with the solution. |
| • On the TE-8S-MD models the metal wetted parts are fabricated from 316 S.S. The stationary spindle and Thrust Washers are made of porcelain ceramic. The O-ring for the housing is Viton rubber. The bushing in the Impeller Assembly is carbon. There are no other materials in contact with the solution. |
• Standard bushing materials include carbon, Teflon / Ryton /carbon composite and mica-filled Teflon. These may be used with either glass-filled polypropylene, Kynar or 316 stainless steel impeller magnet assemblies to insure complete chemical compatibility. The standard spindle for all three models is ceramic, while Hastelloy and stainless steel are available on special order for enhanced chemical resistance. Both the front and rear thrust washers are available in ceramic, Hastelloy, or (exclusive to Series 8 and Series 10 models) silicon carbide. Viton, ethylene propylene or Teflon O-rings are available to further ensure chemical compatibility.
|
| |
|
Additional Images:
 |
|
|
|
|
|
|
|
|
|
