These fit Flojet and Jabsco Diaphragm pumps.

Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.

Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.
Suitable for Fresh or Salt Water use.
Easily Cleaned with See Through Thread-On Cap.

Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications.
Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.

Maximum Flow Rates:
With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM)
With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM)
With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)

Maximum Water Temperature: 160F (70C)
Maximum Pressure: 70 PSI (5 bar)

The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.

**Please base your purchase on the description of the strainer and not on the photo of the strainer. The photos are not all exactly accurate.

Click here for Snap-In Quad Port Fittings:
Port Fittings